Albert-Richard 2 – 1201 Geneva – Switzerland
Call or email us +41 22 731 62 72 or infos@leadmusic.com

Leadmusic, Geneva - Switzerland
2 rue Albert-Richard, +41 22 731 62 72
Ask for our offer Regular price: CHF 245.00 VAT 7.7% included. Without shipping costs.
Information:

Turn any full-range passive or powered monitor speaker or sound system into a dynamic guitar cabinet, loaded with your choice of drivers. Get incredible guitar tone with ADA’s new analog GCS Series “Natural Resonance” miked cabinet simulators.

No mics, power amps, guitar cabinets needed.  Just take your guitar signal from your pedal board, preamp or power amp (GCS-3/5 only) and send it to the house sound console or board or powered full-range cabinet. ADA adds a New Cabinet Simulator / DI Box to its expanding line of Cabinet Simulators with the GCS-5.

The new GCS-5 adds to ADA’s line of analog cabinet simulators and processed DI boxes, doubling the tonal capabilities of its predecessors by adding an AMERICAN / BRITISH speaker type selector switch.   The GCS-5 replaces the physical combination of speakers, cabinets and microphones used in live performance and recording with a consistent and “real world” simulation in a small steel enclosure.

The GCS-5 features a unique set of unconventional filters tuned to simulate the acoustic resonances and frequency responses of mic’d guitar speaker cabinets. The GCS-5 is inserted between the output of your preamplifier, power amp or pedal board and a recording interface or PA system. The GCS-5 includes a LEVEL control with an LED monitoring meter to optimize performance. The XLR OUTPUT is compatible with phantom power, and a 20dB PAD allows for direct connection to power amp outputs. The HEADPHONE OUTPUT with a separate LEVEL control is provided for private monitoring and practice. The GCS-5 puts the guitar player back in control and gives them the opportunity to keep “their tone” consistent from gig to gig as well as in the studio.


Specifications:
  • Selectable 10” or 12” Speaker Size
  • Selectable VINTAGE (Alnico) or MODERN (Ceramic) Speaker Character
  • Selectable OPEN BACK or SEALED Cabinet Type
  • Selectable AMERICAN or BRITISH sound type
  • HEADPHONE output with level control
  • Variable MICROPHONE PLACEMENT Control to “position” the mic for deep or bright frequency response.
  • ¼” phone jack INPUT with a direct, un-buffered PASS THROUGH ¼” phone jack.  This effectively splits the signal to feed both a guitar amplifier (the THRU) and a mixing console (one of the outputs, either ¼” phone single ended or XLR balanced)
  • XLR Balanced Output has selectable LINE or MIC LEVEL Output and a GROUND LIFT for Pin 1
  • Pure Analog Circuit Design using thru-hole, low-noise components
  • Rugged all-steel chassis with durable powder coat finish
  • Powered by a single industry standard 9VDC AC Adapter, but runs internally at 18 volts for higher headroom and lower noise
  • Dimensions: Width: 3.35″ Length: 4.2″ Depth: 1.8″
  • Designed and manufactured in California
  • Power supply incl.