Use the Clean Mix knob to go from 100% Clean boost (minimum setting) to
100% Overdrive (max. setting), or anything in between.

• Clipping chooses between three different clipping diode voices:

A) No diodes low gain, organic. B) Two LEDs medium gain, bright.
C) Three signal diodes higher gain, smooth asymmetrical clipping.

• Bass switch chooses between three different bass levels:

A) Slight bass cut. B) Slight bass boost. C) Larger bass boost.
You will find that B sounds almost exactly in the middle of A and C.

Overdrive 2: Typical Drive, Tone (high boost / cut)*, and Volume knobs, plus

Use the Bass knob to go from bass cut (minimum setting) to bass boost (max.
setting), or anything in between.

* The Tone knob is slightly different than a typical overdrive tone control in that it
boosts gain slightly as it boosts highs when turned toward maximum.

Internal Buffer On/Off: If you open the pedal, you will see a slide switch for each overdrive
which allows you to turn on/off the Pure Tone buffer circuit. We recommend that you leave the
first channel buffer on. However, if you want pure true bypass switching, you may turn both
switches off.

• – 9VDC / 56 mA minimum
• – size 13 cm (B) x 11,3 cm (T) x 5,2 cm (H) (incl Jack & controls)