- Nouveaux produits
- Matériel d’occasion
- Offres spéciales
- Exclusivités Leadmusic
- Guitares électriques (145)
- Pédales et multi effets (268)
- Amplis guitares (77)
- Basses (30)
- Amplis basses (23)
- Lampes d'amplification (12)
- Instruments acoustiques (77)
- Accessoires (62)
- MAO & Software / Sonorisation & Microphones (55)
- Vintage & raretés (60)
- ADA
- AKG
- Altman Guitars
- Amistar resophonic
- Anasounds
- Bacci Guitars and Basses
- Beyerdynamic
- Boss / Roland
- Bourgeois
- Charvel
- Collings
- Cordial
- D’Addario
- Darkglass Electronics
- DB-11 Decibel Eleven
- DR Strings
- DS Custom Audio Electronics
- DSM & Humboldt Electronics
- Dunable Guitars
- EBow
- Eich Amplification
- Electro-Harmonix
- Elixir
- Elmwood
- Elrick Bass Guitars
- Empress
- Epiphone
- Ernie Ball
- ESP / E-II
- EVH
- Fender Guitares
- Finger Ease
- Framus
- George L’s cables
- GFI System
- Gibson
- GigRig
- Gretsch Guitars
- Greuter Pedals
- Gruv Gear
- Harvest
- HeadRush FX
- Ibanez
- IK Multimedia
- ISP Technologies
- Jackson
- Jacques Stompboxes
- Jam Pedals
- Jetslide Guitar Slides
- K&K Sound
- Karol Guitars
- Kauffmann Guitars
- Kemper Amps
- Kernom
- König&Meyer ( K&M )
- Le Pape Steelguitars
- Lehle
- Leho Ukulele
- Line6
- Lowden
- Manson Guitar Works
- Markbass
- Marshall
- Martin Guitars
- MeloDuende Guitars
- MI Audio Effects
- Mission Engineering
- Modtone Effects
- Mono case
- Mullard
- MXR
- Neural DSP
- Oasis
- Ormsby
- Pedal Pawn
- Peterson Tuners
- Pre-War guitars
- Preston Thompson Guitars
- PRS Guitars
- Radial
- Raven Straps
- Relish Guitars
- Reverend Guitars
- RMC
- Ruokangas Guitars
- Sabolovic
- Sandberg Guitars
- Santa Cruz
- Schertler
- Sho-Bud Pedal Steel Guitars
- Shure
- Squier
- Sterling by Music Man
- String Swing
- Strymon
- Suhr Guitars
- Super-Vee
- Sustainiac
- T-REX
- Taylor Guitares
- TC Electronic
- Terry Rogers Guitars
- Tom Anderson
- Truetone
- Tung Sol
- Two Notes
- Victory Amplification
- Visual Sound
- Vovox
- William King
- Xotic Effects
- ZOOM
- Zuta Group

De la tuerie, simplement de la tuerie… J’hésite à bêtement arrêter ma description là, tellement cet ampli est de la tuerie…Allez on en va pas mourir à développer un peu la description de ce impressionnant ampli tout lampe. Le Zuta GBG120 est le fer de lance de la marque suédoise Zuta et est un ampli à lampes entièrement analogique monté en rack 19″, avec seulement 3 unités de rack de haut. Il ne fait que 20 cm de profondeur et délivre une puissance de 120watts. Le Zuta GBG120 fait tout, réellement et vous emmène des années 1950 aux années 2050 en un éclair !
Avec son design ultra compact, le GBG120 est doté de 4 canaux, chacun possédant des commandes séparées de gain, de volume et d’égalisation, ainsi que de plusieurs commutateurs de mode, de style console éclairés dans différentes couleurs pour que vous ayez un visuel de vos set up dans n’importe quel environnement. Vous pourrez composer le son exact que vous recherchez en un rien de temps et être sûr que votre son sera aussi propre, doux, doux, délicat, funky, pétillant, croquant, rock, puissant, expressif et agressif que vous, car oui, Le GBG120 couvre tous les registres sonores et est super réactif et organique. Zuta Group a travaillé extrêmement dur pour ne pas sacrifier le son clair au détriment des capacités de gain ultra élevé. Cela n’a été rendu possible que grâce à la mise en œuvre de quatre topologies de préampli différentes fonctionnant toutes ensemble à l’intérieur de cet ampli.
Contrairement à d’autres amplificateurs qui peuvent occuper beaucoup d’espace précieux sur scène ou en studio, la conception du GBG120 en fait le choix parfait pour tout musicien qui a besoin d’un amplificateur puissant et polyvalent qui ne prendra pas trop de place. Mais le Zuta GBG120 n’est pas seulement compact : il est également doté de fonctionnalités qui vous épateront. Avec une section solo pour une polyvalence accrue active sur les 4 canaux et un Noise Gate intégré et assignable par canal pour vous aider à obtenir le son parfait sans bruit, cet amplificateur ne ressemble à rien de ce que vous avez jamais joué auparavant. Et grâce aux options de boucle série et parallèle, vous pouvez facilement intégrer vos pédales et effets préférés dans votre configuration. N’oublions pas les lampes – avec des lampes 12AX7 dans la section préampli, et des lampes KT88, KT77, 6550, 6L6 et EL34 dans n’importe quelle combinaison dans la section ampli de puissance. Vous pouvez obtenir ce son riche, chaleureux et dynamique qui ne vient que des amplificateurs à tubes. Et avec ces amplis de qualité « Beyond Boutique », vous pouvez être sûr que cet amplificateur a été construit pour durer et pour offrir les performances que vous attendez et dont vous avez besoin dans les situations les plus critiques, comme sur une scène en direct ou lors d’une session en studio pour votre prochain morceau.
Et le plus important, le son… Ben là c’est simple, il manque les mots pour vous faire rendre compte de la qualité et de la polyvalence du GBG120. Tant en clean qu’en overdrive ou en énormes saturations, le GBG120 est dynamique, défini, riches en harmoniques et délivre une attaque et une compression naturelle qui ne mentent pas sur leurs origines : les lampes. Cet ampli délivre le meilleur de tous les mondes d’amplis à lampes et peut se targuer de proposer un des plus fantastiques et larges spectres sonores entendus dans un amplis à lampes. Alors quand en plus, l’ampli en question est compact, relativement léger et au rapport qualité-prix sans précédent, c’est vraiment la fête.
Spécifications:
- GATE – Threshold knob, each channel has a GATE button to activate the gate function independently, rotating the knob counter-clockwise will raise the threshold resulting in that less signal will pass.
- LINE – This button gives you the control to toggle between LINE IN and INST IN, but this only affects the jacks on the rear panel.
- GAIN, VOLUME, LOW, MID, HIGH – Separate knob sections for each of the 4 channels;
- Channel 1 – Dedicated 4 buttons, LOW CUT, GAIN, GATE, BRIGHT;
- Channel 2 – Dedicated 4 buttons, VINTAGE, GAIN, GATE, BRIGHT;
- Channel 3 – Dedicated 4 buttons, VINTAGE, GAIN, GATE, BRIGHT;
- Channel 4 – Dedicated 4 buttons, LOW BOOST, TIGHT, GATE, MID BOOST;
- SOLO – Dedicated LEVEL knob;
- PRESENCE knob dampens the brightness of the amp when turned counter-clockwise.
- PRESENCE Frequency Shift button is located in between the PRESENCE knob and DEPTH knob.
- DEPTH – Speaker cabinet frequency resonance knob.
- MIX – This knob operates as a “Send” in serial mode and “Mix” of dry vs wet signal when engaged the parallel mode.
- “//” – The parallel loop button is located above the MIX knob.
- FX – This activates the MAIN FX loop and is located above the MIX knob.
- SFX – This activates the SOLO FX loop and is located above the MASTER knob.
- STAND BY – AB-A-B – This is the STAND BY stepped rotary knob on the front panel above the POWER button. You can choose STAND BY which puts the amp in stand by mode. You can choose AB which engages booth pairs of power-amp tubes. You can also choose A or B which engages only one of the pairs of power-amp tubes and cuts it down to half power. Possible combinations 4 x KT88, 4 x KT77, 4 x 6550, 4 x 6L6 or 4 x EL34 or for example a mix of one pair of 6L6 and one pair of EL34. Or run it in half power mode for example mode “A” a pair of 6L6 or mode “B” a pair of EL34.
- POWER – The POWER button turns on the amp, the illuminated colours of the POWER button will change accordingly to the modes selected with the STAND BY stepped rotary knob located above the POWER button. BLUE for active and RED for stand by.
- MASTER – Master volume knob.
- GBG button activating DIODE bridging for the channels 2-3-4 adding more compression and clipping to the signal. It is located under the STAND BY stepped rotary knob and organized in pair A and pair B. The 4 diodes around the GBG button indicates which tube pairs are active. GREEN diodes means active and RED diodes means stand by.
- SPEAKER OUT JACKS – 2 x 4 Ohms + 2 x 8 Ohms + 1 x 16 Ohm.
- INPUT – INPUT JACK 1 on the front panel and INPUT JACK 2 located on the rear panel. The INPUT on the front panel is “Master“ and overrides both the INST IN on the rear panel and the LINE IN on the rear panel. Even if the LINE switch is engaged on the front panel.
- INST OUT – This is a buffered signal just passing through, delivering an unaltered and equally levelled signal, which can be used to play through 2 x GBG120 creating a stereo rig.
- LINE IN – Balanced line-in level signal located on the rear panel, can be used for Re-Amping or as an external hardware plugin connected to your AD/DA of your DAW. You can also connect a line level signal coming from a wireless system for example.
- LINE OUT – Balanced line-out level signal located on the rear panel, the signal is derived after the power Amp section before hitting the speaker cabinet. Attention!!! A speaker MUST ALWAYS BE CONNETCED TO THE SPEAKER JACKS at all times during all operational scenarios with this Amp!!!
- The FX – SEND & RETURN – Send and Return jacks are located on the rear panel.
- The SFX – SOLO SEND & RETURN – It is only active when the SOLO button and the SFX button are both engaged. Send and return jacks are located on the rear panel and the SFX loop is only serial and you can use the switch to change between +4 and -10 operating level.
- FOOT CTRL – Foot controller XLR connector is located on the rear panel.
- FS-1 – Foot controller (included) with 6 switches and an XLR connector on the side panel.
- Pre-amp tubes are 7 x 12AX7.
- Power-amp – You can choose to use 4 x KT88, 4 x KT77, 6550, 4 x 6L6 and 4 x EL34 or mix with one pair of 6L and one pair of EL34.
- 19” Rackable.
- Ultra silent industry quality level built in fan, for cool operation under any circumstance.
- 230V/115V Switchable voltage selector located on the rear panel. ATTENTION! Changing voltage requires change of FUSE to the appropriate value. FUSE socket located at the MAINS INPUT located on the rear panel.
- Dimensions (w d h): 483 x 220 x 133 mm; 19 x 8.66 x 5.25”.
- 16 kg; 35 lbs weight.
Vidéos: