Albert-Richard 2 – 1201 Genf – Schweiz
Kontakt +41 22 731 62 72 oder infos@leadmusic.com

Leadmusic, Genf - Schweiz
2 rue Albert-Richard, +41 22 731 62 72
Preis auf Anfrage UVP: CHF 3,990.00 incl. 8.1% MwSt. Ohne Versandkosten.
Beschreibung:

Was für ein Killer-Verstärker!!! Ich könnte dummerweise hier mit meiner Beschreibung aufhören, da dieser Verstärker so umwerfend ist … Komm schon, wir werden nicht mit einer Beschreibung dieses beeindruckenden Vollröhrenverstärkers sterben. Der Zuta GBG120 ist die Speerspitze der schwedischen Marke Zuta und ein vollständig analoger Röhrenverstärker, der in einem 19-Zoll-Rack montiert ist und nur 3 Höheneinheiten hoch ist. Er ist nur 20 cm tief und liefert 120 Watt Leistung. Der Zuta GBG120 macht alles, wirklich, und versetzt Sie im Handumdrehen von den 1950er- in die 2050er-Jahre!

Mit seinem ultrakompakten Design verfügt der GBG120 über 4 Kanäle, jeder mit separaten Gain-, Lautstärke- und EQ-Reglern, sowie mehrere in verschiedenen Farben beleuchtete Modusschalter im Konsolenstil, sodass Sie Ihr Setup in jeder Umgebung sehen können. Sie können in kürzester Zeit genau den Sound auswählen, den Sie suchen, und können sicher sein, dass Ihr Sound so sauber, süß, süß, zart, funkig, sprudelnd, knackig, rockig, kraftvoll, ausdrucksstark und aggressiv ist Sie sind es, denn ja, der GBG120 deckt alle Klangregister ab und ist super reaktionsschnell und organisch. Die Zuta Group hat extrem hart daran gearbeitet, den sauberen Klang nicht auf Kosten der Ultra-High-Gain-Fähigkeiten zu opfern. Möglich wurde dies nur durch die Implementierung von vier verschiedenen Vorverstärkertopologien, die alle in diesem Verstärker zusammenarbeiten.

Im Gegensatz zu anderen Verstärkern, die auf der Bühne oder im Studio viel wertvollen Platz beanspruchen können, ist der GBG120 aufgrund seines Designs die perfekte Wahl für jeden Musiker, der einen leistungsstarken, vielseitigen Verstärker benötigt, der nicht zu viel Platz einnimmt. Aber der Zuta GBG120 ist nicht nur kompakt, er ist auch vollgepackt mit Funktionen, die Sie umhauen werden. Mit einer Solo-Sektion für zusätzliche Vielseitigkeit, die auf allen 4 Kanälen aktiv ist, und einem integrierten, kanalzuweisbaren Noise Gate, das Ihnen dabei hilft, den perfekten rauschfreien Klang zu erzielen, ist dieser Verstärker anders als alles, was Sie jemals zuvor gespielt haben. Und mit seriellen und parallelen Loop-Optionen können Sie Ihre Lieblingspedale und -effekte ganz einfach in Ihr Setup integrieren. Vergessen wir nicht die Röhren – mit 12AX7-Röhren in der Vorverstärkersektion und KT88-, KT77-, 6550-, 6L6- und EL34-Röhren in beliebiger Kombination in der Endstufensektion. Sie erhalten den satten, warmen und dynamischen Klang, den nur Röhrenverstärker bieten. Und mit diesen „Beyond Boutique“-Qualitätsverstärkern können Sie sicher sein, dass dieser Verstärker auf Langlebigkeit ausgelegt ist und in den kritischsten Situationen, wie auf einer Live-Bühne oder während einer Studio-Session für Ihren nächsten Track, die Leistung liefert, die Sie erwarten und benötigen .

Und am wichtigsten ist der Klang … Nun, es ist ganz einfach, es gibt keine Worte, um die Qualität und Vielseitigkeit des GBG120 zu beschreiben. Sowohl im Clean- als auch im Overdrive- oder enormen Sättigungsmodus ist der GBG120 dynamisch, definiert, reich an Obertönen und liefert einen natürlichen Attack und eine Kompression, die nicht über ihren Ursprung lügen: die Röhren. Dieser Verstärker bietet das Beste aus allen Röhrenverstärkerwelten und kann mit einem der fantastischsten und breitesten Klangspektren aufwarten, die in einem Röhrenverstärker zu hören sind. Wenn der betreffende Verstärker außerdem kompakt, relativ leicht und mit einem beispiellosen Preis-Leistungs-Verhältnis ist, ist er wirklich ein Killer-Verstärker!!!


Funktionen:
  • GATE – Threshold knob, each channel has a GATE button to activate the gate function independently, rotating the knob counter-clockwise will raise the threshold resulting in that less signal will pass.
  • LINE – This button gives you the control to toggle between LINE IN and INST IN, but this only affects the jacks on the rear panel.
  • GAIN, VOLUME, LOW, MID, HIGH – Separate knob sections for each of the 4 channels;
  • Channel 1 – Dedicated 4 buttons, LOW CUT, GAIN, GATE, BRIGHT;
  • Channel 2 – Dedicated 4 buttons, VINTAGE, GAIN, GATE, BRIGHT;
  • Channel 3 – Dedicated 4 buttons, VINTAGE, GAIN, GATE, BRIGHT;
  • Channel 4 – Dedicated 4 buttons, LOW BOOST, TIGHT, GATE, MID BOOST;
  • SOLO – Dedicated LEVEL knob;
  • PRESENCE knob dampens the brightness of the amp when turned counter-clockwise.
  • PRESENCE Frequency Shift button is located in between the PRESENCE knob and DEPTH knob.
  • DEPTH – Speaker cabinet frequency resonance knob.
  • MIX – This knob operates as a “Send” in serial mode and “Mix” of dry vs wet signal when engaged the parallel mode.
  • “//” – The parallel loop button is located above the MIX knob.
  • FX – This activates the MAIN FX loop and is located above the MIX knob.
  • SFX – This activates the SOLO FX loop and is located above the MASTER knob.
  • STAND BY – AB-A-B – This is the STAND BY stepped rotary knob on the front panel above the POWER button. You can choose STAND BY which puts the amp in stand by mode. You can choose AB which engages booth pairs of power-amp tubes. You can also choose A or B which engages only one of the pairs of power-amp tubes and cuts it down to half power. Possible combinations 4 x KT88, 4 x KT77, 4 x 6550, 4 x 6L6 or 4 x EL34 or for example a mix of one pair of 6L6 and one pair of EL34. Or run it in half power mode for example mode “A” a pair of 6L6 or mode “B” a pair of EL34.
  • POWER – The POWER button turns on the amp, the illuminated colours of the POWER button will change accordingly to the modes selected with the STAND BY stepped rotary knob located above the POWER button. BLUE for active and RED for stand by.
  • MASTER – Master volume knob.
  • GBG button activating DIODE bridging for the channels 2-3-4 adding more compression and clipping to the signal. It is located under the STAND BY stepped rotary knob and organized in pair A and pair B. The 4 diodes around the GBG button indicates which tube pairs are active. GREEN diodes means active and RED diodes means stand by.
  • SPEAKER OUT JACKS – 2 x 4 Ohms + 2 x 8 Ohms + 1 x 16 Ohm.
  • INPUT – INPUT JACK 1 on the front panel and INPUT JACK 2 located on the rear panel. The INPUT on the front panel is “Master“ and overrides both the INST IN on the rear panel and the LINE IN on the rear panel. Even if the LINE switch is engaged on the front panel.
  • INST OUT – This is a buffered signal just passing through, delivering an unaltered and equally levelled signal, which can be used to play through 2 x GBG120 creating a stereo rig.
  • LINE IN – Balanced line-in level signal located on the rear panel, can be used for Re-Amping or as an external hardware plugin connected to your AD/DA of your DAW. You can also connect a line level signal coming from a wireless system for example.
  • LINE OUT – Balanced line-out level signal located on the rear panel, the signal is derived after the power Amp section before hitting the speaker cabinet. Attention!!! A speaker MUST ALWAYS BE CONNETCED TO THE SPEAKER JACKS at all times during all operational scenarios with this Amp!!!
  • The FX – SEND & RETURN – Send and Return jacks are located on the rear panel.
  • The SFX – SOLO SEND & RETURN – It is only active when the SOLO button and the SFX button are both engaged. Send and return jacks are located on the rear panel and the SFX loop is only serial and you can use the switch to change between +4 and -10 operating level.
  • FOOT CTRL – Foot controller XLR connector is located on the rear panel.
  • FS-1 – Foot controller (included) with 6 switches and an XLR connector on the side panel.
  • Pre-amp tubes are 7 x 12AX7.
  • Power-amp – You can choose to use 4 x KT88, 4 x KT77, 6550, 4 x 6L6 and 4 x EL34 or mix with one pair of 6L and one pair of EL34.
  • 19” Rackable.
  • Ultra silent industry quality level built in fan, for cool operation under any circumstance.
  • 230V/115V Switchable voltage selector located on the rear panel. ATTENTION! Changing voltage requires change of FUSE to the appropriate value. FUSE socket located at the MAINS INPUT located on the rear panel.
  • Dimensions (w d h): 483 x 220 x 133 mm; 19 x 8.66 x 5.25”.
  • 16 kg; 35 lbs weight.


Videos: