Albert-Richard 2 – 1201 Genf – Schweiz
Kontakt +41 22 731 62 72 oder infos@leadmusic.com

Leadmusic, Genf - Schweiz
2 rue Albert-Richard, +41 22 731 62 72
DS Custom XPC Prescription Experience Fuzz Clone Overdrive / Disto / Boosters & Preamp Exklusivität Neue Produkte
Preis auf Anfrage UVP: CHF 219.00 incl. 8.1% MwSt. Ohne Versandkosten.
Beschreibung:

The XPC is the DS Custom version of a clone of one of the best fuzz pedals available, the Prescription Electronics Experience Fuzz. The goal was to create a faithful reproduction, but also to make a few modifications to further improve the fuzz. That’s why DS Custom placed the potentiometers on the top of the unit rather than on the side. We also added LEDs to the footswitches to indicate which switches are active.

You’ll also notice the Stock/Mod switch, which only affects the pedal’s Swell circuit. On the original unit, the Swell sounded a little off on the lower frets. So DS Custom added a small modification that improves the sound on the lower frets without affecting anything else.

And as a result, the XPC is one of the most fabulous fuzz pedals on the market, faithfully reproducing the gain of the Prescription Electronics references.


Funktionen:
  • On Footswitch: Switches from Bypass to Effect Sound. If LED is active, you’ll hear the effected sound of the Pedal
  • Octave Footswitch: Adds an Octave sound to the Fuzz, this Switch only works when the pedal is activated
  • Swell Footswitch: Turns on the Swell circuit. Please note, that this Switch only works if the Octave Switch and the On Switch are also activated
  • Stock/Mod Switch: Only affects the Swell circuit. The Swell effect works in the Mod-Position better on the lower notes
  • Volume Poti: Use this to set the output volume of the pedal to your liking
  • Tone Poti: Adjusts the treble and bass. Turn to the left to get a bassier sound, turn to the right to get more treble
  • Fuzz Poti: Controls the amount of fuzz
  • Swell Poti: Controls the volume of the swell mode. Please note that this also affects the overall output of the pedal. Best is to start with a lower setting here and slightly increase it.