The Truetone 1 SPOT Pro CS12 pedalboard power brick can power virtually any combination of guitar effects pedals you can imagine. And its 12 power outlets are fully isolated to minimize noise in your rig. Four outputs are switchable between 9-volt and 12-volt operation, and a very cool variable output (4V to 9V) gives you extra tonal control over certain pedals – more on that below. Amazing compact and lighweight, (206 x 86 x 50mm, 1.06 Kg ) the Truetone 1SPOT CS12 offers 2 outputs 500mA, 2 outputs 9VDC  250mA, 1 outputs with SAG control from 4 to 9VDC and 100mA, 4 outputs in 9VDC 100mA, 2 outputs 18 VDC with 100mA et 1 outputs 9VAC 800mA…

You get all the cables you need to connect your pedals to the 1 SPOT Pro CS12: two 26″, two 22″, four 18″, three 12″, and one 21″ cable. You’ll also get three adapters for special-needs pedals with reversed polarity or different jack types. And for your battery-powered pedals that don’t have a power connection, a 9-volt battery adapter cable is included.

Do you have a certain overdrive or fuzz pedal that simply sounds and feels better when it’s using an old battery? Connect it to output seven on the 1 SPOT Pro CS12, and then adjust the trim knob between 4-volts and 9-volts until you find the perfect amount of power for the tone you want.

Outlets three through six on the Truetone 1 SPOT Pro CS12 are switchable between 9-volt and 12-volt operation. Individual toggle switches on the bottom of the power brick let you set up any combination of power values. That means you’ll be able to power your existing set of pedals, and you’ll also be covered when you get new pedals with different power requirements in the future.